- Direct connection
- High efficient
- Easy maintenance
- Safety Voltage
- Green Energy
- VOLTAGE 48V-220VDC
- POWER 1500W/2HP
- MAX HEAD 15
- MAX FLOW 20000LPH
-22%
Agricultural Appliances, water pump
Shiyuan DC Solar Pump 3″ Inch
- Direct connection
- High efficient
- Easy maintenance
- Safety Voltage
- Green Energy
- VOLTAGE 48V-220VDC
- POWER 1500W/2HP
- MAX HEAD 15
- MAX FLOW 20000LPH
KSh 35,000.00 KSh 45,000.00
Based on 0 reviews
Be the first to review “Shiyuan DC Solar Pump 3″ Inch”
Related products
-
Solar Panels, water pump
Solarmax 24V/50M Lift Submersible Solar Water Pump
Product details
The Solar-Powered direct water pump Kit is conveniently powered by energy from sunlight, no external batteries or electricity needed. The solar water pump has a Water output of 1500 L/Hr, can do 50 Metres pull depths ( Best for up to 150 feet well/borehole).
OTHER FEATURES:- Can pump water from a river at 2000 l/hr with fairly sloppy area for 3 kilometres
- No need for battery and solar controller
- Can work with solar panels only ( 2 panels of 150 watts)
- Can pump water from fairly sloppy area to 3 Kilometers
- Horse pump 1.5 hp
- Does not need a controller
- Should NOT be used with inverter
- Can go dry without damage i.e no need for float switch
- Product has a life span of 15-20Years
- Solar-powered submersible pump suitable for wells and boreholes 4 inch diameter or larger.
- No need for solar charge controller, i.e. connect the two wires of the pump directly to solar panel.
- No need for float switch. The pump can run dry without damage. Profile
- This pump is best for small/Medium sale use i.e where water requirement is between 10,000 to 15,000 litres per day.
- Very good for irrigation.
SKU: n/a -
Accessories, Agricultural Appliances, water pump
Generic Automatic Pump Control Booster Water Pump Pressure Controller Press Gauges
-25%
Accessories, Agricultural Appliances, water pumpGeneric Automatic Pump Control Booster Water Pump Pressure Controller Press Gauges
An in-line pump controller for automatic operation by flow sensing and suitable for boosting from header tanks. Features include:-
- Starts pump when flow is sensed (minimum 2.4 litres/min) and stops when flow ceases.
- Pump stop time adjustable between 10 to 180 secs.
- System is un-pressured in no flow condition so eliminating pump cycling
- Easy to operate with simple push button controls.
- Led lights indicate the functioning of the pump.Automatically stops if no water is in the pump.
SKU: n/a -
water pump
Pedrollo WATER PUMP 0.5 HP ITALY PKM60
The Original Pedrollo PKm60 is a robust, reliable and economical pump used principally for water transfer in domestic and small scale water transfer applications. The pump body is made from cast iron with a brass insert set into the front housing for improved starting performance and protection from jamming. The impeller is made from brass.
Pumps can be installed for manual or automatic control using either the unique ‘Presscontrol’ unit or a pressure tank and switch. Also available is the integral ‘Hydrofresh’ version (Pkm60 only) which combines a 24L horizontal diaphragm tank, pressure switch and gauge with pressure settings of 1.4 Bar for pump start and 2.8 Bar for pump stop.
MOTORPumps are close coupled to a TEFC brushless induction motor designed for continuous operation. A thermal relay is provided in the windings to protect against electrical and mechanical overload and the pump can be connected directly to the mains power supply through a 10amp fuse or MCB.SKU: n/a -
Agricultural Appliances, water pump
Dayliff Pedrollo DAVIS – With 40m Cable & Float Switch
- Pedrollo DAVIS peripheral impeller submersible pumps are designed for pumping clean water in domestic applications from boreholes and wells. They are based on the established 4SKm design though are much improved featuring a cast stainless steel pump housing with special anti-seize design, double mechanical seals to prevent water leakage in to the motor and built in thermal overload for motor protection.All components in contact with water are manufactured from stainless steel with the impeller precision moulded using high grade corrosion proof Ryton engineering plastic that is specially resistant to sand and abrasion. The motor capacitor is integral with the pump and no separate control unit is required. Pumps are supplied with 20m or 40m of drop cable to customer choice.
- MOTOR
- All pumps are fitted with hermetically sealed re-windable liquid cooled induction motors designed for continuous duty provided the pump is fully submerged. They should be connected directly to mains supply through a 10A MCB or switch fuse.
SKU: n/a
There are no reviews yet.