Dayliff AUTOMATIC PUMP CONTROL

• The DAYLIFF DDW submersible pump range are centrifugal submersible pumps designed for small scale drainage, irrigation, fountain and water transfer applications. Two versions are available, the standard S version with open impeller for lightly turbid water and the vortex version for water with higher silt loads.Pump construction is of high strength engineering plastic for the pump casing, suction base and impeller and an external float switch is provided for automatic pump control. All pumps are supplied with 5m of waterproof power cable and a union connected outlet suitable for threaded or hose connection.
• MOTOR
• Pumps are provided with intergral non-overloading induction motors designed for continuous operation. A thermal cut-out is provided in the motor winding to protect against pump overload and the pump can be connected directly to the mains power supply through a 10A fuse or MCB.

The Solar-Powered direct water pump Kit is conveniently powered by energy from sunlight, no external batteries or electricity needed. The solar water pump has a Water output of 1500 L/Hr, can do 50 Meters pull depths (Best for up to 150 feet well/borehole).

OTHER FEATURES:

Can pump water from a river at 2000 l/hr with fairly sloppy area for 3 kilometers

No need for battery and solar controller

Can work with solar panels only (2 panels of 150 watts)

Can pump water from fairly sloppy area to 3 Kilometers

Horse pump 1.5 hp

Does not need a controller

Should NOT be used with inverter

Can go dry without damage i.e no need for float switch

Product has a life span of 15-20Years

Solar-powered submersible pump suitable for wells and boreholes 4 inch diameter or larger.

No need for solar charge controller, i.e. connect the two wires of the pump directly to solar panel.

No need for float switch. The pump can run dry without damage. Profile

This pump is best for small/Medium sale use i.e where water requirement is between 10,000 to 15,000 liters per day.

Very good for irrigation.